Shenzhen XiangMin Instrumentation Co., Ltd

Showing 1 - 10 of 13, total 2 pages [First] [Previous] [Next] [Last]

fire sifety needle flame test apparatus
Specification: XM-ZYS
Detail: Specifications Supplier Supply IEC60695-11-5 Needle Flame Test Apparatus 1.Reference to IEC60695-11-5 Standards 2.Product in Stock Supplier Supply IEC60695-11-5 Needle Flame Test Apparatus 1.Introduction Reference to IEC...

china digital mulitmeter/ ohmmeter manufacture
Specification: XM-OM
Detail: Description: Digital LCD screen for easy and clear reading, Manual or automatic range change. Design with a bracket stand on the back for your convenient use. Accurate testing. Widely used in electric and electronic circuit...

china 180¡ãwire bend tester manufacture
Specification: XM-WS180
Detail: Specifications 1.Plug wire bending tester 2.operation convenience 3.widely use 4.lowest price 5.maintain 3 years Test folding strength between the plug-chip and the wires. Testing method is that the test materials is pla...

china film flexibility scratch tester manufacture
Specification: XM-ZHY
Detail: Specifications 1.Film Flexibility Scratch Tester 2.For coating scratch resistance test 3.Loading range 0-2000g 4.Style speed 30-40mm / s Equipment Description: Implementation of the standards: GB/T9279-88, ISO1518-73. T...

china the car key stroke hand load tester manufacture
Specification: XM-FZH
Detail: Equipment Description: Peak Force, Return Force, Distance and Click rate can directly display the values in the chart, does not need manual calculation.Measurement graphs by computer memory can always zoom in and zoom out, ...

china ndj-5s digital bench viscometer manufacture
Specification: NDJ-5
Detail: Specifications 1.Characterized by 16 bit 2.Micro processor core controlled circuit 3.Gearless driven 4.LCD in bule color 5.Direct display Model NDJ-5S NDJ-8S Measured Range 1-100000 1-2000000 (***.S) Rotation ...

china electric tape adhesion roller manufacture
Specification: XM-DDN
Detail: Product Description Electric Tape Adhesion Roller is used to prepare the sample for the peeling strength and holding power testing of adhesive tapes. With constant pressure and speed, it sticks the adhesive tape sample flat...

china coating bend-over tester manufacture
Specification: XM-TWZ
Detail: Specifications Bend Tester is specially designed to ***ermine the flexibility-T bending performance of color coating of steel plate.Bend the sample by 180¡ã around itself (coating is at the outside the curved surface), stic...

china falling sand abrasion tester manufacture
Specification: XM-LS
Detail: Equipment Description: LS Falling Sand Abrasion Tester is applicable to ***ermine abrasion resistance performance of organic coating. The resistance to abrasing is calculated as the abrasive loss in mass per film. It complies...

china putty flexibility tester manufacture
Specification: XM-QTB
Detail: Equipment description: Putty Flexibility Tester set by the film with the substrate under the conditions of deformation without damage occurred with the capacity to evaluate film's flexibility. Technical parameter: Model QTB...


Showing 1 - 10 of 13, total 2 pages [First] [Previous] [Next] [Last]
1 2